IS Codes, IRC standards and methodology papers — curated for working engineers. Enter your email once to unlock any download.
| Code No. | Title & Scope | Download |
|---|---|---|
| WRD 1 — Hydrometry | ||
| IS 1191 (2003) | Hydrometric Determinations - Vocabulary and Symbols | |
| IS 1192 (1981) | Velocity Area Methods for Measurement of Flow | |
| IS 1194 (1960) | Forms for Recording Measurement of Flow | |
| IS 2912 (1999) | Liquid Flow Measurement - Slope Area Method | |
| IS 2951-1 (1965) | Flow of Liquids in Closed Conduits Part 1 | |
| IS 2951-2 (1965) | Flow of Liquids in Closed Conduits Part 2 | |
| IS 3910 (1992) | Rotating Element Current Meters | |
| IS 3911 (1994) | Surface Floats | |
| IS 3912 (1993) | Sounding Rods | |
| IS 3913 (2005) | Suspended Sediment Load Samplers | |
| IS 3917 (2003) | Scoop Type Bed Material Samplers | |
| IS 3918 (1966) | Code of Practice for Current Meter | |
| IS 4073 (1967) | Specification for Fish Weights | |
| IS 4080 (1994) | Vertical Staff Gauges | |
| IS 4477-2 (1975) | Measurement of Fluid Flow by Venturi Meters Part 2 | |
| IS 4858 (1968) | Velocity Rods | |
| IS 4890 (1968) | Measurement of Suspended Sediment in Open Channels | |
| IS 4986 (2002) | Installation of Raingauge Non-Recording Type | |
| IS 4987 (1994) | Network of Raingauge Stations | |
| IS 5542 (2003) | Guide for Storm Analysis | |
| IS 6062 (1971) | Flow Measurement Using Standing Wave Flume-Fall | |
| IS 6063 (1971) | Flow Measurement Using Standing Wave Flume | |
| IS 6064 (1971) | Sounding and Suspension Equipment | |
| IS 6330 (2012) | Liquid Flow Measurement End Depth Method | |
| IS 6339 (1971) | Concentration and Particle Size of Sediment | |
| IS 6339 (2013) | Hydrometry Sediment Concentration Particle Size | |
| IS 8389 (2003) | Installation of Recording Raingauges | |
| IS 9108 (1979) | Liquid Flow Using Thin Plate Weirs | |
| IS 9115 (2002) | Estimation of Incompressible Fluid Flow in Closed Conduits | |
| WRD 3 — Ground Water & Related Investigations | ||
| IS 4410-11-1 (1972) | Glossary of Terms - River Valley Projects Part 11 Hydrology Section 1 General Terms | |
| IS 4410-11-2 (1972) | Glossary of Terms - River Valley Projects Part XI Hydrology Section 2 Precipitation and Run Off | |
| IS 4410-11-3 (1973) | Glossary of Terms - River Valley Projects Part 11 Hydrology Section 3 Infiltration and Water Losses | |
| IS 4410-11-4 (1973) | Glossary of Terms - River Valley Projects Part XI Hydrology Section 4 Hydrographs | |
| IS 4410-11-6 (1994) | Glossary of Terms - River Valley Projects Part 11 Hydrology Section 6 Ground Water | |
| IS 4410-11-7 (1984) | Glossary of Terms - River Valley Projects Part 11 Hydrology Section 7 Quality of Water | |
| IS 13969 (1994) | Sampling of Ground Water - Guidelines | |
| IS 14476-1 to 9 (1998) | Test Pumping of Water Wells - Code of Practice | |
| IS 15755 (2007) | Hydrometry - Geophysical Logging of Boreholes for Hydrogeological Purposes | |
| IS 15792 (2008) | Artificial Recharge to Ground Water - Guidelines | |
| IS 15797 (2008) | Roof Top Rainwater Harvesting - Guidelines | |
| IS 15896 (2011) | Manual Methods for Measurement of Ground Water Level in a Well | |
| IS 15897 (2011) | Surface Geophysical Surveys for Hydro Geological Studies | |
| WRD 5 — Geological Investigation & Subsurface Exploration | ||
| IS 4078 (1980) | Code of Practice for Indexing and Storage of Drill Cores | |
| IS 4410-7 (1982) | Glossary of Terms - River Valley Projects Part 7 Engineering Geology | |
| IS 4453 (2009) | Subsurface Exploration by Pits Trenches Drifts and Shafts - Code of Practice | |
| IS 4464 (1985) | Code of Practice for Presentation of Drilling Information and Core Description in Foundation Investigation | |
| IS 5313 (1980) | Guide for Core Drilling Observations | |
| IS 5497 (2008) | Guide for Topographical Surveys for River Valley Projects | |
| IS 5529-1 (1985) | Code of Practice for In-Situ Permeability Test Part 1 Test in Overburden | |
| IS 5529-1 (2013) | Code of Practice for In-Situ Permeability Test Part 1 Test in Overburden | |
| IS 5529-2 (2006) | In-Situ Permeability Tests Part 2 Tests in Bedrock | |
| IS 6926 (1996) | Diamond Core Drilling - Site Investigation for River Valley Projects - Code of Practice | |
| IS 6935 (1973) | Method for Determination of Water Level in a Bore Hole | |
| IS 6955 (2008) | Subsurface Exploration for Earth and Rockfill Dams - Code of Practice | |
| IS 7422-1 (1974) | Symbols and Abbreviations for Geological Maps and Logs Part 1 Abbreviations | |
| IS 7422-2 (1974) | Symbols and Abbreviations for Geological Maps and Logs Part 2 Igneous Rocks | |
| IS 7422-3 (1974) | Symbols and Abbreviations for Geological Maps and Logs Part 3 Sedimentary Rocks | |
| IS 7422-4 (1985) | Symbols and Abbreviations for Geological Maps and Logs Part 4 Metamorphic Rocks | |
| IS 7422-5 (1992) | Symbols and Abbreviations for Geological Maps and Logs Part 5 Line Symbols | |
| IS 10060 (1981) | Code of Practice for Subsurface Investigation for Power House Sites | |
| IS 10290 (1982) | Code of Practice for Photogeological Interpretation and Mapping of River Valley Project Site | |
| IS 11385 (2008) | Subsurface Exploration for Canals and Cross Drainage Works - Code of Practice | |
| IS 13216 (1991) | Code of Practice for Geological Exploration for Reservoir Sites | |
| IS 13578 (2008) | Subsurface Exploration for Barrages and Weirs - Code of Practice | |
| IS 14330 (1996) | Groundwater Investigations for Hydraulic Structures - Guidelines | |
| IS 15662 (2006) | Geological Exploration for Gravity Dams and Overflow Structures - Code of Practice | |
| IS 15681 (2006) | Geological Exploration by Geophysical Method (Seismic Refraction) - Code of Practice | |
| IS 15686 (2006) | Recommendations for Preparation of Geological and Geotechnical Maps for River Valley Projects | |
| IS 15736 (2007) | Geological Exploration by Geophysical Method (Electrical Resistivity) - Code of Practice | |
| WRD 6 — Water Resources Planning, Management & Evaluation | ||
| IS 4008 (1985) | Guide for Presentation of Project Report for River Valley Projects | |
| IS 4186 (1985) | Guide for Preparation of Project Report for River Valley Projects | |
| IS 4410-1 (1991) | Glossary of Terms - River Valley Projects Part 1 Irrigation Practice | |
| IS 4410-2 (1967) | Glossary of Terms - River Valley Projects Part 2 Project Planning | |
| IS 4410-4 (1982) | Glossary of Terms - River Valley Projects Part 4 Drawings | |
| IS 4410-11-5 (1977) | Glossary of Terms - River Valley Projects Part 11 Hydrology Section 5 Floods | |
| IS 4410-14-1 (1977) | Glossary of Terms - River Valley Projects Part XIV Soil Conservation and Reclamation Section 1 | |
| IS 4410-14-2 (1977) | Glossary of Terms - River Valley Projects Part 14 Soil Conservation and Reclamation Section 2 | |
| IS 4410-17 (1977) | Glossary of Terms - River Valley Projects Part 17 Water Requirements of Crops | |
| IS 4410-21 (1987) | Glossary of Terms - River Valley Projects Part 21 Flood Control | |
| IS 4877 (1968) | Guide for Preparation of Estimate for River Valley Projects | |
| IS 5510 (1969) | Guide for Soil Surveys for River Valley Projects | |
| IS 6748-1 (1973) | Recommendations for Watershed Management - Soil Conservation Part 1 Agronomic Aspects | |
| IS 7560 (1974) | Guidelines for Allocation of Cost Among Different Purposes of River Valley Projects | |
| IS 10336 (1982) | Guidelines for Preparation of Completion Reports of Multipurpose River Valley Projects | |
| IS 13028 (1991) | Guidelines for Overall Planning of River Basin | |
| IS 13142 (1991) | Proforma for Reporting Progress of Benefits Created by River Valley Projects | |
| IS 13218-1 (1992) | Proforma for Reporting Progress During Construction - River Valley Projects Part 1 Irrigation Works | |
| IS 13218-2 (1991) | Proforma for Reporting Progress During Construction - River Valley Projects Part 2 Hydel Works | |
| IS 13218-3 (1992) | Proforma for Reporting Progress During Construction - River Valley Projects Part 3 Flood Control | |
| IS 13668 (1993) | Guidelines for Fixing Intensity of Irrigation | |
| IS 13739 (1993) | Guidelines for Estimation of Flood Damages | |
| IS 14519 (1998) | Guidelines for Fixing Rates for Irrigation Water | |
| IS 15087 (2001) | Planning and Design of Drainage in Irrigation Projects - Guidelines | |
| WRD 8 — Foundation & Substructures | ||
| IS 4410-19 (1996) | Glossary of Terms - River Valley Projects Part 19 Grouting | |
| IS 4999 (1991) | Recommendations for Grouting of Pervious Soils | |
| IS 5050 (1992) | Code of Practice for Design Construction and Maintenance of Relief Wells | |
| IS 6066 (1994) | Pressure Grouting of Rock Foundations in River Valley Projects - Recommendations | |
| IS 8414 (1977) | Guidelines for Design of Under-Seepage Control Measures for Earth and Rockfill Dams | |
| IS 11293-1 (1985) | Guidelines for Design of Grout Curtains Part 1 Earth and Rockfill Dams | |
| IS 11293-2 (1993) | Guidelines for Design of Grout Curtains Part 2 Masonry and Concrete Gravity Dams | |
| IS 11973 (1986) | Code of Practice for Treatment of Rock Foundations Core and Abutment Contacts for Embankment Dams | |
| IS 12584 (1989) | Bentonite for Grouting in Civil Engineering Works | |
| IS 14343 (1996) | Choice of Grouting Materials for Alluvial Grouting - Guidelines | |
| IS 14344 (1996) | Design and Construction of Diaphragms for Under Seepage Control - Code of Practice | |
| WRD 9 — Dams & Spillways | ||
| IS 4410-8 (1992) | Glossary of Terms - River Valley Projects Part 8 Dams and Dam Section | |
| IS 4410-9 (1982) | Glossary of Terms - River Valley Projects Part 9 Spillways and Syphons | |
| IS 4410-18 (1983) | Glossary of Terms - River Valley Projects Part 18 Energy Dissipation Devices | |
| IS 4997 (1968) | Criteria for Design of Hydraulic Jump Type Stilling Basins with Horizontal and Sloping Apron | |
| IS 5186 (1994) | Design of Chute and Side Channel Spillways - Criteria | |
| IS 6512 (1984) | Criteria for Design of Solid Gravity Dams | |
| IS 6934 (1998) | Recommendations for Hydraulic Design of High Ogee Overflow Spillways | |
| IS 7365 (2010) | Criteria for Hydraulic Design of Bucket Type Energy Dissipators | |
| IS 7894 (1975) | Code of Practice for Stability Analysis of Earth Dams | |
| IS 8605 (1977) | Code of Practice for Construction of Masonry in Dams | |
| IS 8826 (1978) | Guidelines for Design of Large Earth and Rockfill Dams | |
| IS 9296 (2001) | Guidelines for Inspection and Maintenance of Dam and Appurtenant Structures | |
| IS 9297 (1979) | Recommendations for Lighting Ventilation and Other Facilities Inside the Dam | |
| IS 9429 (1999) | Drainage System for Earth and Rockfill Dams - Code of Practice | |
| IS 10135 (1985) | Code of Practice for Drainage System for Gravity Dams Their Foundations and Abutments | |
| IS 10137 (1982) | Guidelines for Selection of Spillways and Energy Dissipators | |
| IS 10635 (1993) | Freeboard Requirements in Embankment Dams - Guidelines | |
| IS 11155 (1994) | Construction of Spillways and Similar Overflow Structures - Code of Practice | |
| IS 11216 (1985) | Code of Practice for Permeability Test for Masonry | |
| IS 11223 (1985) | Guidelines for Fixing Spillway Capacity | |
| IS 11485 (1985) | Criteria for Hydraulic Design of Sluices in Concrete and Masonry Dams | |
| IS 11527 (1985) | Criteria for Structural Design of Energy Dissipators for Spillways | |
| IS 11772 (2009) | Design of Drainage Arrangements of Energy Dissipators and Training Walls of Spillways | |
| IS 12169 (1987) | Criteria for Design of Small Embankment Dams | |
| IS 12200 (2001) | Provision of Water-Stops at Transverse Contraction Joints in Masonry and Concrete Dams | |
| IS 12720 (2004) | Criteria for Structural Design of Spillway Training Walls and Divide Walls | |
| IS 12731 (1989) | Hydraulic Design of Impact Type Energy Dissipators - Recommendations | |
| IS 12804 (1989) | Criteria for Estimation of Aeration Demand for Spillway and Outlet Structures | |
| IS 12966-1 (1992) | Code of Practice for Galleries and Other Openings in Dams Part 1 General Requirements | |
| IS 12966-2 (1990) | Code of Practice for Galleries and Other Openings in Dams Part 2 Structural Design | |
| IS 13048 (1991) | Recommendations for Hydraulic Design of Duck Bill Spillways | |
| IS 13144 (1991) | Recommendations for Provision of Facilities Outside Dams | |
| IS 13195 (1991) | Preliminary Design Operation and Maintenance of Protection Works Downstream of Spillways | |
| IS 13551 (1992) | Structural Design of Spillway Pier and Crest - Criteria | |
| IS 13645 (1993) | Guniting the Upstream Face of Masonry Dams - Guidelines | |
| IS 14591 (1999) | Temperature Control of Mass Concrete for Dams - Guideline | |
| IS 14690 (1999) | Quality Control During Construction of Earth and Rockfill Dams - Recommendations | |
| IS 14954 (2001) | Distress and Remedial Measures in Earth and Rockfill Dams - Guidelines | |
| IS 15058 (2002) | PVC Water-Stops at Transverse Contraction Joints for Masonry and Concrete Dams | |
| SP 55 (1993) | Design Aid for Anchorages for Spillway Piers Training Walls and Divide Walls | |
| WRD 10 — Reservoirs & Lakes | ||
| IS 4410-6 (1983) | Glossary of Terms - River Valley Projects Part 6 Reservoirs | |
| IS 5477-1 (1999) | Fixing the Capacities of Reservoirs - Methods Part 1 General Requirements | |
| IS 5477-2 (1994) | Fixing the Capacities of Reservoirs - Methods Part 2 Dead Storage | |
| IS 5477-3 (2002) | Methods for Fixing the Capacities of Reservoirs Part 3 Live Storage | |
| IS 5477-4 (1971) | Methods for Fixing the Capacities of Reservoirs Part 4 Flood Storage | |
| IS 6518 (1992) | Code of Practice for Control of Sediment in Reservoirs | |
| IS 6939 (1992) | Methods for Determination of Evaporation from Reservoirs | |
| IS 7323 (1994) | Operation of Reservoirs - Guidelines | |
| IS 8237 (1985) | Code of Practice for Protection of Slope for Reservoir Embankments | |
| IS 12182 (1987) | Guidelines for Determination of Effects of Sedimentation in Planning and Performance of Reservoirs | |
| IS 13665 (1993) | Sedimentation in Reservoirs - Method of Measurement | |
| IS 14654 (1999) | Minimising Evaporation Losses from Reservoirs - Guidelines | |
| IS 15472 (2004) | Guidelines for Planning and Design of Low Level Outlets for Evacuating Storage Reservoirs | |
| IS 15840 (2009) | Determination of Volume of Water and Water Level in Lakes and Reservoirs | |
| WRD 12 — Hydraulic Gates & Valves | ||
| IS 4410-16-1 (1999) | Glossary of Terms - River Valley Projects Part 16 Gates and Valves Section 1 Gates | |
| IS 4410-16-2 (1981) | Glossary of Terms - River Valley Projects Part 16 Gates and Valves Section 2 Valves | |
| IS 4410-23 (1999) | Glossary of Terms - River Valley Projects Part 23 Hoists Cranes and Other Related Terms | |
| IS 4622 (2003) | Recommendations for Structural Design of Fixed-Wheel Gates | |
| IS 4623 (2000) | Recommendations for Structural Design of Radial Gates | |
| IS 5620 (1985) | Recommendations for Structural Design Criteria for Low Head Slide Gates | |
| IS 6938 (2005) | Design of Rope Drum and Chain Hoists for Hydraulic Gates - Code of Practice | |
| IS 7326-1 (1992) | Penstock and Turbine Inlet Butterfly Valves Part 1 Criteria for Structural and Hydraulic Design | |
| IS 7326-2 (1992) | Penstock and Turbine Inlet Butterfly Valves Part 2 Guidelines for Design and Selection of Control Equipment | |
| IS 7326-3 (1976) | Penstock and Turbine Inlet Butterfly Valves Part 3 Recommendations for Operations and Maintenance | |
| IS 7332-1 (1991) | Spherical Valves for Hydropower Stations Part 1 Criteria for Structural and Hydraulic Design | |
| IS 7332-2 (1993) | Spherical Valves for Hydropower Stations Part 2 Selection of Control Equipment | |
| IS 7332-3 (1994) | Spherical Valves for Hydropower Stations Part 3 Recommendations for Operation and Maintenance | |
| IS 7718 (1991) | Recommendations for Inspection Testing and Maintenance of Fixed Wheel and Slide Gates | |
| IS 9349 (2006) | Recommendations for Structural Design of Medium and High Head Slide Gates | |
| IS 10021 (2000) | Guidelines for De-Icing System for Hydraulic Installations | |
| IS 10096-1-1 (1983) | Inspection Testing and Maintenance of Radial Gates and Rope Drum Hoists Part 1 Section 1 Gates | |
| IS 10096-1-2 (1986) | Inspection Testing and Maintenance of Radial Gates and Rope Drum Hoists Part 1 Section 2 Rope Drum Hoists | |
| IS 10096-2 (1983) | Inspection Testing and Maintenance of Radial Gates and Rope Drum Hoists Part 2 Erection | |
| IS 10096-3 (2002) | Inspection Testing and Maintenance of Radial Gates and Rope Drum Hoists Part 3 After Erection | |
| IS 10210 (1993) | Criteria for Design of Hydraulic Hoists for Gates | |
| IS 11228 (1985) | Recommendations for Design of Screw Hoists for Hydraulic Gates | |
| IS 11793 (1986) | Guidelines for Design of Float-Driven Hoisting Mechanism for Automatic Gated Control | |
| IS 11855 (2004) | Guidelines for Design and Use of Different Types of Rubber Seals for Hydraulic Gates | |
| IS 13041 (1991) | Recommendation for Inspection Testing and Maintenance of Hydraulic Hoist After Erection | |
| IS 13591 (1992) | Criteria for Design of Lifting Beams | |
| IS 13623 (1993) | Criteria for Choice of Gates and Hoists | |
| IS 14177 (1994) | Guidelines for Painting System for Hydraulic Gates and Hoists | |
| IS 15466 (2004) | Rubber Seals for Hydraulic Gates | |
| WRD 13 — Canals & Cross Drainage Works | ||
| IS 3872 (2002) | Lining of Canals with Burnt Clay Tiles - Code of Practice | |
| IS 3873 (1993) | Laying Cement Concrete/Stone Slab Lining on Canals - Code of Practice | |
| IS 4410-5 (1982) | Glossary of Terms - River Valley Projects Part 5 Canals | |
| IS 4410-15-1 (1973) | Glossary of Terms - River Valley Projects Part 15 Canal Structures Section 1 General Terms | |
| IS 4410-15-2 (1973) | Glossary of Terms - River Valley Projects Part 15 Canal Structures Section 2 Transitions | |
| IS 4410-15-3 (1977) | Glossary of Terms - River Valley Projects Part XV Canal Structures Section 3 Flumes | |
| IS 4410-15-4 (1977) | Glossary of Terms - River Valley Projects Part 15 Canal Structures Section 4 Regulating Works | |
| IS 4410-15-5 (1992) | Glossary of Terms - River Valley Projects Part 15 Canal Structures Section 5 Cross Drainage Works | |
| IS 4515 (2002) | Stone Pitched Lining for Canals - Code of Practice | |
| IS 4558 (1995) | Under-Drainage of Lined Canals - Code of Practice | |
| IS 4701 (1982) | Code of Practice for Earthwork on Canals | |
| IS 4839-1 (1992) | Maintenance of Canals - Code of Practice Part 1 Unlined Canals | |
| IS 4839-2 (1992) | Maintenance of Canals - Code of Practice Part 2 Lined Canals | |
| IS 4839-3 (1992) | Code of Practice for Maintenance of Canals Part 3 Canal Structures Drains and Outlets | |
| IS 5256 (1992) | Sealing Expansion Joints in Concrete Lining of Canals - Code of Practice | |
| IS 5690 (1982) | Guide for Laying Combination Lining for Existing Unlined Canals | |
| IS 5968 (1987) | Guide for Planning and Layout of Canal System for Irrigation | |
| IS 6004 (1980) | Criteria for Hydraulic Design of Sediment Ejector for Irrigation and Power Channels | |
| IS 6522 (1972) | Criteria for Design of Silt Vanes for Sediment Control in Offtaking Canals | |
| IS 6936 (1992) | Guide for Location Selection and Hydraulic Design of Canal Escapes | |
| IS 7112 (2002) | Criteria for Design of Cross-Section for Unlined Canals in Alluvial Soil | |
| IS 7113 (2003) | Soil-Cement Lining for Canals - Code of Practice | |
| IS 7114 (1973) | Criteria for Hydraulic Design of Cross Regulators for Canals | |
| IS 7331 (1981) | Code of Practice for Inspection and Maintenance of Cross-Drainage Works | |
| IS 7495 (1974) | Criteria for Hydraulic Design of Silt Selective Head Regulator for Sediment Control | |
| IS 7784-1 (1993) | Design of Cross Drainage Works - Code of Practice Part 1 General Features | |
| IS 7784-2-1 (1995) | Design of Cross Drainage Works Part 2 Section 1 Aqueducts | |
| IS 7784-2-2 (2000) | Design of Cross Drainage Works Part 2 Section 2 Superpassages | |
| IS 7784-2-3 (1996) | Design of Cross Drainage Works Part 2 Section 3 Canal Syphons | |
| IS 7784-2-4 (1999) | Design of Cross Drainage Works Part 2 Section 4 Level Crossings | |
| IS 7784-2-5 (2000) | Design of Cross Drainage Works Part 2 Section 5 Syphon Aqueducts | |
| IS 7871 (1975) | Criteria for Hydraulic Design of Groyne Walls for Sediment Distribution at Offtake Points | |
| IS 7873 (1975) | Code of Practice for Lime Concrete Lining for Canals | |
| IS 7880 (1975) | Criteria for Hydraulic Design of Skimming Platform for Sediment Control in Offtaking Canal | |
| IS 7986 (1976) | Code of Practice for Canal Outlets | |
| IS 8835 (1978) | Guidelines for Planning and Design of Surface Drains | |
| IS 9097 (1979) | Guide for Laying Lining of Canals with Hot Bitumen or Bituminous Felts | |
| IS 9447 (1980) | Guidelines for Assessment of Seepage Losses from Canals by Analytical Method | |
| IS 9451 (1994) | Guidelines for Lining of Canals in Expansive Soils | |
| IS 9452-1 (1993) | Measurement of Seepage Losses from Canals - Code of Practice Part 1 Ponding Method | |
| IS 9452-2 (1980) | Measurement of Seepage Losses from Canals Part 2 Inflow-Outflow Method | |
| IS 9452-3 (1988) | Measurement of Seepage Losses from Canals Part 3 Seepage Meter Method | |
| IS 9698 (1995) | Lining of Canals with Polyethylene Film - Code of Practice | |
| IS 9913 (2000) | Code of Practice for Construction of Cross Drainage Works | |
| IS 10430 (2000) | Criteria for Design of Lined Canals and Guidance for Selection of Type of Lining | |
| IS 10646 (1991) | Canal Linings - Cement Concrete Tiles | |
| IS 11809 (1994) | Lining for Canals by Stone Masonry - Code of Practice | |
| IS 12331 (1988) | General Requirements for Canal Outlets | |
| IS 12379 (1988) | Code of Practice for Lining of Water-Courses and Field Channels | |
| IS 13143 (1991) | Joints in Concrete Lining of Canals - Sealing Compound | |
| WRD 14 — Water Conductor Systems | ||
| IS 4410-20 (1983) | Glossary of Terms - River Valley Projects Part 20 Tunnels | |
| IS 4880-1 (1987) | Code of Practice for Design of Tunnels Conveying Water Part 1 General Design | |
| IS 4880-2 (1976) | Code of Practice for Design of Tunnels Conveying Water Part 2 Geometric Design | |
| IS 4880-3 (1976) | Code of Practice for Design of Tunnels Conveying Water Part 3 Hydraulic Design | |
| IS 4880-4 (1971) | Code of Practice for Design of Tunnels Conveying Water Part 4 Structural Design of Concrete Lining in Rock | |
| IS 4880-5 (1972) | Code of Practice for Design of Tunnels Conveying Water Part V Structural Design of Concrete Lining in Soft Strata | |
| IS 4880-6 (1971) | Code of Practice for Design of Tunnels Conveying Water Part 6 Tunnel Support | |
| IS 4880-7 (1975) | Code of Practice for Design of Tunnels Conveying Water Part 7 Structural Design of Steel Lining | |
| IS 5330 (1984) | Criteria for Design of Anchor Blocks for Penstocks with Expansion Joints | |
| IS 5878-1 (1971) | Code of Practice for Construction of Tunnels Part I Precision Survey and Setting Out | |
| IS 5878-2-1 (1970) | Code of Practice for Construction of Tunnels Part II Underground Excavation in Rock Section 1 Drilling and Blasting | |
| IS 5878-2-2 (1971) | Code of Practice for Construction of Tunnels Part II Underground Excavation in Rock Section 2 Ventilation Lighting Mucking | |
| IS 5878-2-3 (1971) | Code of Practice for Construction of Tunnels Part II Underground Excavation in Rock Section 3 Steeply Inclined Tunnels | |
| IS 5878-3 (1972) | Code of Practice for Construction of Tunnels Part III Underground Excavation in Soft Strata | |
| IS 5878-4 (1971) | Code of Practice for Construction of Tunnels Conveying Water Part 4 Tunnel Supports | |
| IS 5878-5 (1976) | Code of Practice for Construction of Tunnels Conveying Water Part 5 Concrete Lining | |
| IS 5878-6 (1975) | Code of Practice for Construction of Tunnel Conveying Water Part 6 Steel Lining | |
| IS 5878-7 (1972) | Code of Practice for Construction of Tunnels Conveying Water Part 7 Grouting | |
| IS 6531 (1994) | Canal Head Regulators - Criteria for Design | |
| IS 7357 (1974) | Code of Practice for Structural Design of Surge Tanks | |
| IS 7396-1 (1985) | Criteria for Hydraulic Design of Surge Tanks Part 1 Simple Restricted Orifice and Differential Surge Tanks | |
| IS 7396-2 (1985) | Criteria for Hydraulic Design of Surge Tanks Part 2 Tail Race Surge Tanks | |
| IS 7396-3 (1990) | Criteria for Hydraulic Design of Surge Tanks Part 3 Special Surge Tanks | |
| IS 7396-4 (1983) | Criteria for Hydraulic Design of Surge Tanks Part 4 Multiple Surge Tanks | |
| IS 7563 (1986) | Code of Practice for Structural Design of Cut and Cover Concrete Conduits | |
| IS 7916 (1992) | Open Power Channels - Code of Practice | |
| IS 9761 (1995) | Hydropower Intakes - Criteria for Hydraulic Design | |
| IS 11105 (2004) | Design and Construction of Tunnel Plugs - Code of Practice | |
| IS 11388 (2012) | Recommendations for Design of Trash Racks for Intakes | |
| IS 11570 (1985) | Criteria for Hydraulic Design of Irrigation Intake Structures | |
| IS 11625 (1986) | Criteria for Hydraulic Design of Penstocks | |
| IS 11639-1 (1986) | Criteria for Structural Design of Penstocks Part 1 Surface Penstocks | |
| IS 11639-2 (1995) | Structural Design of Penstocks - Criteria Part 2 Buried/Embedded Penstocks in Rock | |
| IS 11639-3 (1996) | Structural Design of Penstocks - Criteria Part 3 Specials for Penstocks | |
| IS 12633 (1989) | First Filling and Emptying of Pressure Tunnels - Guidelines | |
| IS 12967-1 (1990) | Analysis of Hydraulic Transients in Hydro-Electric and Pumping Plants Part 1 Criteria for Analysis | |
| IS 13495 (1992) | Design of Sediment Excluders - Guidelines | |
| IS 15310 (2003) | Hydraulic Design of Pump Sumps and Intakes - Guidelines | |
| WRD 15 — Hydroelectric Power House Structures | ||
| IS 4247-1 (1993) | Code of Practice for Structural Design of Surface Hydroelectric Power Stations Part 1 Data for Design | |
| IS 4247-2 (1992) | Code of Practice for Structural Design of Hydroelectric Power Part 2 Superstructure | |
| IS 4247-3 (1998) | Code of Practice for Structural Design of Surface Hydel Power Stations Part 3 Substructure | |
| IS 4410-10 (1988) | Glossary of Terms - River Valley Projects Part 10 Hydro-Electric Power Station Including Water Conductor System | |
| IS 4461 (1998) | Code of Practice for Joints in Surface Hydro-Electric Power Stations | |
| IS 4720 (1982) | Code of Practice for Ventilation of Surface Hydel Power Stations | |
| IS 4721 (2000) | Code of Practice for Drainage and Dewatering of Surface/Underground Hydroelectric Power Station | |
| IS 5496 (1993) | Guide for Preliminary Dimensioning and Layout of Elbow Type Draft Tubes for Surface Hydroelectric Power Stations | |
| IS 7207 (1992) | Criteria for Design of Generator Foundation for Hydroelectric Power Stations | |
| IS 7418 (1991) | Criteria for Design of Spiral Casing (Concrete and Steel) | |
| IS 9120 (1979) | Guidelines for Planning Layout and Design of Cavities in Underground Hydroelectric Power Stations | |
| IS 10824 (1984) | Code of Practice for Amenities in Hydroelectric Power Houses | |
| IS 12800-1 (1993) | Guidelines for Selection of Turbines and Layout of Surface Hydro-Electric Power Houses Part 1 Medium and Large Power Houses | |
| IS 12800-2 (1989) | Guidelines for Selection of Turbines and Layout of Surface Hydro-Electric Power Houses Part 2 Pumped Storage Power Houses | |
| IS 12800-3 (1991) | Guidelines for Selection of Hydraulic Turbine and Layout of Surface Hydroelectric Power Houses Part 3 Small Mini and Micro Power Houses | |
| IS 12837 (1989) | Hydraulic Turbines for Medium and Large Power Houses - Guidelines for Selection | |
| WRD 16 — Hydraulic Structures Instrumentation | ||
| IS 6524 (1972) | Code of Practice for Installation and Observation of Instruments for Temperature Measurements Inside Dams | |
| IS 6532 (1972) | Code of Practice for Design Installation Observation and Maintenance of Uplift Pressure Pipes for Hydraulic Structures | |
| IS 7356-1 (2002) | Installation Maintenance and Observation of Instruments for Pore Pressure Measurements in Earth and Rockfill Dams Part 1 Porous Tube Piezometers | |
| IS 7356-2 (2003) | Installation Observation and Maintenance of Instruments for Pore Pressure Measurements in Earth and Rockfill Dams Part 2 Twin Tube Hydraulic Piezometers | |
| IS 7436-1 (1993) | Guide for Types of Measurements for Structures in River Valley Projects Part 1 Earth and Rockfill Dams | |
| IS 7436-2 (1997) | Guide for Types of Measurements for Structures in River Valley Projects Part 2 Concrete and Masonry Dams | |
| IS 7500 (2000) | Code of Practice for Installation and Observation of Cross Arms for Measurement of Internal Vertical Movement in Earth Dams | |
| IS 8226 (1976) | Code of Practice for Installation and Observation of Base Plates for Measurement of Foundation Settlement in Embankments | |
| IS 8282-1 (1976) | Code of Practice for Installation Maintenance and Observations of Pore Pressure Measuring Devices in Concrete and Masonry Dams Part 1 Electrical Resistance Type Cell | |
| IS 8282-2 (1996) | Installation Maintenance and Observations of Pore Pressure Measuring Devices in Concrete and Masonry Dams Part 2 Vibrating Wire Type Cell | |
| IS 10334 (1982) | Code of Practice for Selection Splicing Installation and Protection of Cables for Resistance Type Measuring Devices in Concrete and Masonry Dams | |
| IS 10434-1 (2003) | Installation Maintenance and Observation of Deformation Measuring Devices in Concrete and Masonry Dams Part 1 Resistance Type Jointmeters | |
| IS 10434-2 (1996) | Guidelines for Installation Maintenance and Observation of Deformation Measuring Devices in Concrete and Masonry Dams Part 2 Vibrating Wire Type Joint Meter | |
| IS 12949 (1990) | Code of Practice for Installation Maintenance and Observation of Instruments for Pore Pressure Measurements in Earth Dams - Vibratory Wire Type | |
| IS 13073-1 (2002) | Installation Maintenance and Observation of Displacement Measuring Devices in Concrete and Masonry Dams Part 1 Deflection Measurement Using Plumb Lines | |
| IS 13073-2 (2000) | Installation Maintenance and Observation of Displacement Measuring Devices for Concrete and Masonry Dams Part 2 Geodetic Observation - Crest Collimation | |
| IS 13232 (1992) | Installation Maintenance and Observations of Electrical Strain Measuring Devices in Concrete Dams - Code of Practice | |
| IS 14248 (1995) | Guidelines for Instrumentation of Barrages and Weirs | |
| IS 14278 (1995) | Stress Measuring Devices in Concrete and Masonry Dams - Installation Commissioning and Observations | |
| IS 14750 (2000) | Code of Practice for Installation Maintenance and Observation of Seepage Measuring Devices for Concrete/Masonry and Earth/Rockfill Dams | |
| IS 14793 (2000) | Code of Practice for Installation Maintenance and Observation of the Instruments for Vibration Studies Other Than Earthquakes | |
| WRD 21 — Safety in Construction, Operation & Maintenance | ||
| IS 4410-13 (1985) | Glossary of Terms - River Valley Projects Part 13 Operation Maintenance and Repair | |
| IS 10386-1 (1983) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part I General Aspects | |
| IS 10386-2 (1982) | Safety in Construction Operation and Maintenance of River Valley Projects Part II Amenities Protective Clothing and Equipment | |
| IS 10386-3 (1992) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part 3 Plant and Machinery | |
| IS 10386-4 (1992) | Safety Code for River Valley Projects Part 4 Handling Storage and Transportation of Explosives | |
| IS 10386-5 (1992) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part 5 Electrical Aspects | |
| IS 10386-6 (1983) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part 6 Construction | |
| IS 10386-7 (1993) | Safety Code for River Valley Projects Part 7 Fire Safety Aspects | |
| IS 10386-8 (1995) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part 8 Open Excavation | |
| IS 10386-9 (1998) | Safety Code for Operation and Maintenance of River Valley Projects Part 9 Canals and Cross Drainage Works | |
| IS 10386-10 (1983) | Safety Code for River Valley Projects Part 10 Storage Handling Detection and Safety Measures for Gases Chemicals and Flammable Liquids | |
| IS 10386-11 (2012) | Safety Code for Construction Operation and Maintenance of River Valley Projects Part 11 Underground Excavation | |
| WRD 22 — River Training & Diversion Works | ||
| IS 4410-3 (1988) | Glossary of Terms - River Valley Projects Part 3 River and River Training | |
| IS 4410-12 (1993) | Glossary of Terms - River Valley Projects Part 12 Diversion Works | |
| IS 4410-22 (1994) | Glossary of Terms - River Valley Projects Part 22 Barrages and Weirs | |
| IS 6966-1 (1989) | Hydraulic Design of Barrages and Weirs - Guidelines Part 1 Alluvial Reaches | |
| IS 7349 (2012) | Barrages and Weirs - Operation and Maintenance - Guidelines | |
| IS 7720 (1991) | Criteria for Investigation Planning and Layout for Barrages and Weirs | |
| IS 8408 (1994) | Planning and Design of Groynes in Alluvial River - Guidelines | |
| IS 9461 (1980) | Guidelines for Data Required for Design of Temporary River Diversion Works | |
| IS 9795-1 (1981) | Guidelines for Choice of Type of Diversion Works Part 1 Coffer Dams | |
| IS 10084-1 (1982) | Criteria for Design of Diversion Works Part 1 Coffer Dams | |
| IS 10084-2 (1994) | Design of Diversion Works - Criteria Part 2 Diversion Channel and Open Cut or Conduit in the Body of Dam | |
| IS 10751 (1994) | Planning and Design of Guide Banks for Alluvial Rivers - Guidelines | |
| IS 10788-1 (1984) | Code of Practice for Construction of Diversion Works Part 1 Cellular Coffer Dams | |
| IS 11130 (1984) | Criteria for Structural Design of Barrages and Weirs | |
| IS 11150 (1993) | Construction of Concrete Barrages - Code of Practice | |
| IS 11532 (1995) | Construction and Maintenance of River Embankments (Levees) - Guidelines | |
| IS 12094 (2000) | Guidelines for Planning and Design of River Embankments (Levees) | |
| IS 12892 (1989) | Safety of Barrage and Weir Structures - Guidelines | |
| IS 12926 (1995) | Construction and Maintenance of Guide Banks in Alluvial Rivers - Guidelines | |
| IS 13877 (1993) | Planning and Design of Fish Pass - Guidelines | |
| IS 13912 (1993) | Closure of Diversion Channel and Open Cut or Conduit in the Body of Dam - Code of Practice | |
| IS 14262 (1995) | Planning and Design of Revetments - Guidelines | |
| IS 14592-1 (1998) | Planning and Design of Barrage Power Houses - Guidelines Part 1 Investigation Planning and Layout | |
| IS 14815 (2000) | Design Flood for River Diversion Works - Guidelines | |
| IS 14955 (2001) | Guidelines for Hydraulic Model Studies of Barrages and Weirs | |
| WRD 23 — Measurement & Cost Analysis of Works | ||
| IS 4851 (1987) | Proforma for Estimating Unit Rate of Concrete Used in Mechanized Construction of River Valley Projects | |
| IS 4852 (1987) | Proforma for Estimating Unit Rate of Random Rubble Masonry in Construction of River Valley Projects | |
| IS 9401-1 (1999) | Method of Measurement of Works in River Valley Projects Part 1 Excavation for Foundation | |
| IS 9401-2 (2003) | Method of Measurement of Works in River Valley Projects Part 2 Dewatering | |
| IS 9401-3 (2003) | Method of Measurement of Works in River Valley Projects Part 3 Grouting | |
| IS 9401-4 (1980) | Method of Measurement of Works in River Valley Projects Part 4 Concrete Work | |
| IS 9401-5 (1980) | Method of Measurement of Works in River Valley Projects Part 5 Masonry | |
| IS 9401-6 (1984) | Method of Measurement of Works in River Valley Projects Part 6 Ventilation Pipes and Other Embedded Materials | |
| IS 9401-7 (1984) | Method of Measurement of Works in River Valley Projects Part 7 Joints | |
| IS 9401-8 (1985) | Methods of Measurement of Works in River Valley Projects Part 8 Instrumentation | |
| IS 9401-9 (1987) | Method of Measurement of Works in River Valley Projects Part 9 Lining | |
| IS 9401-10 (1990) | Method of Measurement of Works in River Valley Projects Part 10 Form Work | |
| IS 9401-11 (1998) | Method of Measurement of Works in River Valley Projects Part 11 Diaphragm Walls | |
| IS 9401-12 (1992) | Method of Measurement of Works in River Valley Projects Part 12 Topographical Surveys | |
| IS 9401-13 (1992) | Method of Measurement of Works in River Valley Projects Part 13 Earth and Fill Dams | |
| IS 9401-14 (1992) | Method of Measurement of Works in River Valley Projects Part 14 Canal Works | |
| IS 9401-15 (2010) | Method of Measurement of Works in River Valley Projects Part 15 Investigation Works - Drilling of Bore Holes | |
| IS 9401-16 (1999) | Method of Measurement of Works in River Valley Projects Part 16 Tunneling | |
| IS 9401-17 (1999) | Method of Measurement of Works in River Valley Projects Part 17 Hydromechanical and Related Metal Works | |
| IS 9401-18 (2000) | Method of Measurement of Work in River Valley Projects Part 18 Sheet Piling | |
| IS 9401-19 (2009) | Methods of Measurement of Works in River Valley Projects Part 19 Electro-Mechanical Works | |
| IS 10061 (1991) | Proforma for Analysis of Unit Rate of Excavation of Tunnels by Cyclic Drilling and Blasting | |
| IS 10062 (1991) | Proforma for Analysis of Unit Rate of Quarrying Rock by Mechanical Means | |
| IS 10160 (1982) | Proforma for Analysis of Unit Rate of Earthwork in Construction of River Valley Projects | |
| IS 10421 (1983) | Proforma for Analysis of Unit Rate of Shuttering/Formwork for Concrete Items | |
| IS 10777 (1994) | Proforma for Analysis of Unit Rate of Rock Excavation by Mechanical Means Including Blasting | |
| IS 11399-1 (1985) | Guidelines for Estimating Output Norms of Items of Work in Construction of River Valley Projects Part 1 Earthwork Excavation | |
| IS 11590 (1995) | Guidelines for Working Out Unit Rate Cost of Construction Equipment for River Valley Projects | |
| IS 11638 (2000) | Proforma for Estimation of Unit Rate of Construction of Embankment by Mechanical Means | |
| IS 13418 (1992) | Proforma for Analysis of Unit Rate of Grouting Used in River Valley Projects | |
| IS 13419 (1992) | Proforma for Analysis of Unit Rate of Shotcreting/Guniting Used in River Valley Projects | |
| IS 14590 (1998) | Proforma for Analysis of Unit Rate of Dewatering | |
| IS 14749 (2000) | Proforma for Analysis of Unit Rate of Underground Excavation by Cyclic Drilling and Blasting | |
| IS 14835 (2000) | Guidelines for Estimating Unit Rate of Items of Works in Construction of Rubble Masonry for River Valley Projects | |
| WRD 24 — Environmental Assessment & Management | ||
| IS 15442 (2004) | Parameters for Environmental Impact Assessment of Water Resources Projects | |
| IS 15832 (2008) | Glossary of Technical Terms Related to Environmental Impact | |
| IS 15845 (2009) | Environment Management Plan for Hydropower/Irrigation/Flood Control/Multipurpose River Valley Projects | |
Core IRC design standards for roads, bridges and drainage. 280 documents.
| Code No. | Title & Scope | Download |
|---|---|---|
| IRC:3-1983 | DIMENSIONS AND WEIGHTS OF ROAD DESIGN VEHICLES |
|
| IRC:5-1998 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION I General Features of Design |
|
| IRC:5-2015 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION I General Features of Design |
|
| IRC:6-2014 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION II LOADS AND STRESSES |
|
| IRC:6-2017 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION II LOADS AND LOAD COMBINATIONS |
|
| IRC:7-1971 | RECOMMENDED PRACTICE FOR NUMBERING BRIDGES AND CULVERTS |
|
| IRC:7-2017 | RECOMMENDED PRACTICE FOR NUMBERING CULVERTS, BRIDGES AND TUNNELS |
|
| IRC:9-1972 | TRAFFIC CENSUS ON NON-URBAN ROADS |
|
| IRC:11-1962 | RECOMMENDED PRACTICE FOR THE DESIGN AND LAYOUT OF CYCLE TRACKS |
|
| IRC:11-2015 | RECOMMENDED PRACTICE FOR THE DESIGN AND LAYOUT OF CYCLE TRACKS |
|
| IRC:12-2009 | GUIDELINES FOR ACCESS, LOCATION AND LAYOUT OF ROADSIDE FUEL STATIONS AND SERVICE STATIONS |
|
| IRC:14-2004 | RECOMMENDED PRACTICE FOR OPEN GRADED PREMIX CARPET |
|
| IRC:15-2011 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR CONSTRUCTION OF CONCRETE ROADS |
|
| IRC:15-2017 | CODE OF PRACTICE FOR CONSTRUCTION OF JOINTED PLAIN CONCRETE PAVEMENTS |
|
| IRC:16-2008 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR PRIME AND TACK COAT |
|
| IRC:17-1965 | TENTATIVE SPECIFICATION FOR SINGLE COAT BITUMINOUS SURFACE DRESSING |
|
| IRC:18-2000 | DESIGN CRITERIA FOR PRESTRESSED CONCRETE ROAD BRIDGES (POST-TENSIONED CONCRETE) |
|
| IRC:19-2005 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR WATER BOUND MACADAM |
|
| IRC:20-1966 | RECOMMENDED PRACTICE FOR BITUMINOUS PENETRATION MACADAM |
|
| IRC:21-2000 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION III CEMENT CONCRETE (PLAIN AND REINFORCED) |
|
| IRC:22-2015 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION VI COMPOSITE CONSTRUCTION (LIMIT STATES DESIGN) |
|
| IRC:23-1966 | TENTATIVE SPECIFICATION FOR TWO COAT BITUMINOUS SURFACE DRESSING |
|
| IRC:24-2010 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION V STEEL ROAD BRIDGES (LIMIT STATE METHOD) |
|
| IRC:25-1967 | TYPE DESIGNS FOR BOUNDARY STONES |
|
| IRC:26-1967 | TYPE DESIGN FOR 200-METRE STONES |
|
| IRC:27-2009 | SPECIFICATIONS FOR BITUMINOUS MACADAM |
|
| IRC:28-1967 | TENTATIVE SPECIFICATIONS FOR THE CONSTRUCTION OF STABILIZED SOIL ROADS WITH SOFT AGGREGATE IN AREAS OF MODERATE AND HIGH RAINFALL |
|
| IRC:29-1988 | SPECIFICATIONS FOR BITUMINOUS CONCRETE (ASPHALTIC CONCRETE) FOR ROAD PAVEMENT |
|
| IRC:30-1968 | STANDARD LETTERS AND NUMERALS OF DIFFERENT HEIGHTS FOR USE ON HIGHWAY SIGNS |
|
| IRC:31-1969 | ROUTE MARKER SIGNS FOR STATE ROUTES |
|
| IRC:32-1969 | STANDARD FOR VERTICAL AND HORIZONTAL CLEARANCES OF OVERHEAD ELECTRIC POWER AND TELECOMMUNICATION LINES AS RELATED TO ROADS |
|
| IRC:33-1969 | STANDARD PROCEDURE FOR EVALUATION AND CONDITION SURVEYS OF STABILISED SOIL ROADS |
|
| IRC:34-2011 | RECOMMENDATIONS FOR ROAD CONSTRUCTION IN AREAS AFFECTED BY WATER LOGGING, FLOODING AND/OR SALTS INFESTATION |
|
| IRC:35-2015 | CODE OF PRACTICE FOR ROAD MARKINGS |
|
| IRC:36-2010 | RECOMMENDED PRACTICE FOR CONSTRUCTION OF EARTH EMBANKMENTS AND SUBGRADE FOR ROAD WORKS |
|
| IRC:37-2012 | TENTATIVE GUIDELINES FOR THE DESIGN OF FLEXIBLE PAVEMENTS |
|
| IRC:37-2019 | GUIDELINES FOR THE DESIGN OF FLEXIBLE PAVEMENTS |
|
| IRC:38-1988 | GUIDELINES FOR DESIGN OF HORIZONTAL CURVES FOR HIGHWAYS AND DESIGN TABLES |
|
| IRC:39-1986 | STANDARDS FOR ROAD-RAIL LEVEL CROSSINGS |
|
| IRC:40-2002 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IV (BRICK, STONE AND CEMENT CONCRETE BLOCK MASONRY) |
|
| IRC:41-1997 | GUIDELINES FOR TYPE DESIGNS FOR CHECK BARRIERS |
|
| IRC:42-1972 | PROFORMA FOR RECORD OF TEST VALUES OF LOCALLY AVAILABLE PAVEMENT CONSTRUCTION MATERIALS |
|
| IRC:43-1972 | RECOMMENDED PRACTICE FOR TOOLS, EQUIPMENT AND APPLIANCES FOR CONCRETE PAVEMENT CONSTRUCTION |
|
| IRC:43-2015 | RECOMMENDED PRACTICE FOR PLANTS, TOOLS AND EQUIPMENT REQUIRED FOR CONSTRUCTION AND MAINTENANCE OF CONCRETE ROADS |
|
| IRC:44-2017 | GUIDELINES FOR CEMENT CONCRETE MIX DESIGN FOR PAVEMENTS |
|
| IRC:45-1972 | RECOMMENDATIONS FOR ESTIMATING THE RESISTANCE OF SOIL BELOW THE MAXIMUM SCOUR LEVEL IN THE DESIGN OF WELL FOUNDATIONS OF BRIDGES |
|
| IRC:46-1972 | A POLICY ON ROADSIDE ADVERTISEMENTS |
|
| IRC:47-1972 | TENTATIVE SPECIFICATION FOR BUILT-UP SPRAY GROUT |
|
| IRC:48-1972 | TENTATIVE SPECIFICATION FOR BITUMINOUS SURFACE DRESSING USING PRECOATED AGGREGATES |
|
| IRC:49-1973 | RECOMMENDED PRACTICE FOR THE PULVERIZATION OF BLACK COTTON SOILS FOR LIME STABILISATION |
|
| IRC:50-1973 | RECOMMENDED DESIGN CRITERIA FOR THE USE OF CEMENT-MODIFIED SOIL IN ROAD CONSTRUCTION |
|
| IRC:51-1992 | GUIDELINES FOR THE USE OF SOIL-LIME MIXES IN ROAD CONSTRUCTION |
|
| IRC:52-2019 | GUIDELINES FOR THE ALIGNMENT SURVEY AND GEOMETRIC DESIGN OF HILL ROADS |
|
| IRC:53-2012 | ROAD ACCIDENT RECORDING FORMS A-1 AND A-4 |
|
| IRC:54-1974 | LATERAL AND VERTICAL CLEARANCES UNDERPASSES FOR VEHICULAR TRAFFIC |
|
| IRC:55-1974 | RECOMMENDED PRACTICE FOR SAND-BITUMEN BASE COURSES |
|
| IRC:56-2011 | RECOMMENDED PRACTICES TREATMENT OF EMBANKMENT AND ROADSIDE SLOPES FOR EROSION CONTROL |
|
| IRC:57-2018 | RECOMMENDED PRACTICE FOR SEALING OF JOINTS IN CONCRETE PAVEMENTS |
|
| IRC:58-2015 | GUIDELINES FOR THE DESIGN OF PLAIN JOINTED RIGID PAVEMENTS FOR HIGHWAY |
|
| IRC:59-1976 | TENTATIVE GUIDELINES FOR DESIGN OF GAP GRADED CEMENT CONCRETE MIXES FOR ROAD PAVEMENTS |
|
| IRC:60-1976 | TENTATIVE GUIDELINES FOR THE USE OF LIME-FLY ASH CONCRETE AS PAVEMENT BASE OR SUB-BASE |
|
| IRC:61-1976 | TENTATIVE GUIDELINES FOR CONSTRUCTION OF CEMENT CONCRETE PAVEMENTS IN HOT WEATHER |
|
| IRC:62-1976 | GUIDELINES FOR CONTROL OF ACCESS ON HIGHWAYS |
|
| IRC:63-1976 | TENTATIVE GUIDELINES FOR THE USE OF LOW GRADE AGGREGATES AND SOIL AGGREGATE MIXTURES IN ROAD PAVEMENT CONSTRUCTION |
|
| IRC:64-1990 | GUIDELINES FOR CAPACITY OF ROADS IN RURAL AREAS |
|
| IRC:65-2017 | GUIDELINES FOR PLANNING AND DESIGN OF ROUNDABOUTS |
|
| IRC:66-1976 | RECOMMENDED PRACTICE FOR SIGHT DISTANCE ON RURAL HIGHWAYS |
|
| IRC:67-2012 | CODE OF PRACTICE FOR ROAD SIGNS |
|
| IRC:68-1976 | TENTATIVE GUIDELINES ON CEMENT-FLY ASH CONCRETE FOR RIGID PAVEMENT CONSTRUCTION |
|
| IRC:69-1977 | SPACE STANDARDS FOR ROADS IN URBAN AREA |
|
| IRC:70-2017 | GUIDELINES ON REGULATION AND CONTROL OF MIXED TRAFFIC IN URBAN AREAS |
|
| IRC:71-1977 | RECOMMENDED PRACTICE FOR PREPARATION OF NOTATIONS |
|
| IRC:72-1978 | RECOMMENDED PRACTICE FOR USE AND UPKEEP OF EQUIPMENT, TOOLS AND APPLIANCES FOR BITUMINOUS PAVEMENT CONSTRUCTION |
|
| IRC:73-1980 | GEOMETRIC DESIGN STANDARDS FOR RURAL (NON-URBAN) HIGHWAYS |
|
| IRC:74-1979 | TENTATIVE GUIDELINES FOR LEAN-CEMENT CONCRETE AND LEAN CEMENT-FLY ASH CONCRETE AS A PAVEMENT BASE OR SUBBASE |
|
| IRC:75-2015 | GUIDELINES FOR THE DESIGN OF HIGH EMBANKMENTS |
|
| IRC:76-1979 | TENTATIVE GUIDELINES FOR STRUCTURAL STRENGTH EVALUATION OF RIGID AIRFIELD PAVEMENTS |
|
| IRC:77-1979 | TENTATIVE GUIDELINES FOR REPAIR OF CONCRETE PAVEMENTS USING SYNTHETIC RESINS |
|
| IRC:78-2014 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION VII FOUNDATIONS AND SUBSTRUCTURE |
|
| IRC:79-2019 | RECOMMENDED PRACTICE FOR ROAD DELINEATORS |
|
| IRC:80-1981 | TYPE DESIGNS FOR PICK-UP BUS STOPS ON RURAL (NON-URBAN) HIGHWAYS |
|
| IRC:81-1997 | GUIDELINES FOR STRENGTHENING OF FLEXIBLE ROAD PAVEMENTS USING BENKELMAN BEAM DEFLECTION TECHNIQUE |
|
| IRC:82-1982 | CODE OF PRACTICE FOR MAINTENANCE OF BITUMINOUS SURFACES OF HIGHWAYS |
|
| IRC:82-2015 | CODE OF PRACTICE FOR MAINTENANCE OF BITUMINOUS ROAD SURFACES |
|
| IRC:83-2014 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS (SPHERICAL AND CYLINDRICAL) PART IV |
|
| IRC:84-1983 | CODE OF PRACTICE FOR CURING OF CEMENT CONCRETE PAVEMENTS |
|
| IRC:85-1983 | RECOMMENDED PRACTICE FOR ACCELERATED STRENGTH TESTING AND EVALUATION OF CONCRETE FOR ROAD AND AIRFIELD CONSTRUCTIONS |
|
| IRC:85-2015 | RECOMMENDED PRACTICE FOR ACCELERATED STRENGTH TESTING AND EVALUATION OF CONCRETE |
|
| IRC:86-1983 | GEOMETRIC DESIGN STANDARDS FOR URBAN ROADS IN PLAINS |
|
| IRC:86-2018 | GEOMETRIC DESIGN STANDARDS FOR URBAN ROADS AND STREETS |
|
| IRC:87-2011 | GUIDELINES FOR FORMWORK, FALSEWORK AND TEMPORARY STRUCTURES |
|
| IRC:87-2018 | GUIDELINES FOR FORMWORK, FALSEWORK AND TEMPORARY STRUCTURES FOR ROAD BRIDGES |
|
| IRC:88-1984 | RECOMMENDED PRACTICE FOR LIME FLYASH STABILISED SOIL BASE/SUB-BASE IN PAVEMENT CONSTRUCTION |
|
| IRC:89-1997 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF RIVER TRAINING AND CONTROL WORKS FOR ROAD BRIDGES |
|
| IRC:89-2019 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF RIVER TRAINING AND CONTROL WORKS FOR ROAD BRIDGES |
|
| IRC:90-2010 | GUIDELINES FOR SELECTION, OPERATION AND MAINTENANCE OF BITUMINOUS HOT MIX PLANT |
|
| IRC:91-1985 | TENTATIVE GUIDELINES FOR CONSTRUCTION OF CEMENT CONCRETE PAVEMENTS IN COLD WEATHER |
|
| IRC:92-1985 | GUIDELINES FOR THE DESIGN OF INTERCHANGES IN URBAN AREAS |
|
| IRC:92-2017 | GUIDELINES FOR THE DESIGN OF INTERCHANGES IN URBAN AREAS |
|
| IRC:93-1985 | GUIDELINES ON DESIGN AND INSTALLATION OF ROAD TRAFFIC SIGNALS |
|
| IRC:94-1986 | SPECIFICATION FOR DENSE BITUMINOUS MACADAM |
|
| IRC:95-1987 | SPECIFICATION FOR SEMI-DENSE BITUMINOUS CONCRETE |
|
| IRC:96-1987 | TENTATIVE SPECIFICATION FOR TWO-COAT SURFACE DRESSING USING CATIONIC BITUMEN EMULSION |
|
| IRC:97-1987 | TENTATIVE SPECIFICATION FOR 20 MM THICK PREMIX CARPET USING CATIONIC BITUMEN EMULSION |
|
| IRC:98-2011 | GUIDELINES ON ACCOMMODATION OF UTILITY SERVICES ON ROADS IN URBAN AREAS |
|
| IRC:99-1988 | TENTATIVE GUIDELINES ON THE PROVISION OF SPEED BREAKERS FOR CONTROL OF VEHICULAR SPEEDS ON MINOR ROADS |
|
| IRC:99-2018 | GUIDELINES FOR TRAFFIC CALMING MEASURES IN URBAN AND RURAL AREAS |
|
| IRC:100-1988 | TENTATIVE SPECIFICATION FOR SINGLE COAT SURFACE DRESSING USING CATIONIC BITUMEN EMULSION |
|
| IRC:101-1988 | GUIDELINES FOR DESIGN OF CONTINUOUSLY REINFORCED CONCRETE PAVEMENT WITH ELASTIC JOINTS |
|
| IRC:102-1988 | TRAFFIC STUDIES FOR PLANNING BYPASSES AROUND TOWNS |
|
| IRC:103-2012 | GUIDELINES FOR PEDESTRIAN FACILITIES |
|
| IRC:104-1988 | GUIDELINES FOR ENVIRONMENTAL IMPACT ASSESSMENT OF HIGHWAY PROJECTS |
|
| IRC:105-1988 | TENTATIVE SPECIFICATION FOR BITUMINOUS CONCRETE (ASPHALTIC CONCRETE) FOR AIRFIELD PAVEMENTS |
|
| IRC:105-2019 | SPECIFICATIONS FOR DENSE BITUMINOUS MACADAM AND BITUMINOUS CONCRETE FOR AIRFIELD PAVEMENTS |
|
| IRC:106-1990 | GUIDELINES FOR CAPACITY OF URBAN ROADS IN PLAIN AREAS |
|
| IRC:107-2013 | SPECIFICATION FOR BITUMEN MASTIC WEARING COURSES |
|
| IRC:108-1996 | GUIDELINES FOR TRAFFIC PREDICTION ON RURAL HIGHWAYS |
|
| IRC:108-2015 | GUIDELINES FOR TRAFFIC FORECAST ON HIGHWAYS |
|
| IRC:109-1997 | GUIDELINES FOR WET MIX MACADAM |
|
| IRC:109-2015 | GUIDELINES FOR WET MIX MACADAM |
|
| IRC:110-2005 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR DESIGN AND CONSTRUCTION OF SURFACE DRESSING |
|
| IRC:111-2009 | SPECIFICATIONS FOR DENSE GRADED BITUMINOUS MIXES |
|
| IRC:112-2011 | CODE OF PRACTICE FOR CONCRETE ROAD BRIDGES |
|
| IRC:112-2020 | CODE OF PRACTICE FOR CONCRETE ROAD BRIDGES |
|
| IRC:113-2013 | GUIDELINES FOR THE DESIGN AND CONSTRUCTION OF GEOSYNTHETIC REINFORCED EMBANKMENTS ON SOFT SUBSOILS |
|
| IRC:114-2013 | GUIDELINES FOR USE OF SILICA-FUME IN RIGID PAVEMENT |
|
| IRC:115-2014 | GUIDELINES FOR STRUCTURAL EVALUATION AND STRENGTHENING OF FLEXIBLE ROAD PAVEMENTS USING FALLING WEIGHT DEFLECTOMETER (FWD) TECHNIQUE |
|
| IRC:116-2014 | SPECIFICATIONS FOR READYMADE BITUMINOUS POTHOLE PATCHING MIX USING CUT-BACK BITUMEN |
|
| IRC:117-2014 | GUIDELINES FOR THE STRUCTURAL EVALUATION OF RIGID PAVEMENT BY FALLING WEIGHT DEFLECTOMETER |
|
| IRC:118-2015 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF CONTINUOUSLY REINFORCED CONCRETE PAVEMENT (CRCP) |
|
| IRC:119-2015 | GUIDELINES FOR TRAFFIC SAFETY BARRIERS |
|
| IRC:120-2015 | RECOMMENDED PRACTICE FOR RECYCLING OF BITUMINOUS PAVEMENTS |
|
| IRC:121-2017 | GUIDELINES FOR USE OF CONSTRUCTION AND DEMOLITION WASTE IN ROAD SECTOR |
|
| IRC:122-2017 | GUIDELINES FOR CONSTRUCTION OF PRECAST CONCRETE SEGMENTAL BOX CULVERTS |
|
| IRC:123-2017 | GUIDELINES ON GEOPHYSICAL INVESTIGATION FOR BRIDGES |
|
| IRC:124-2017 | BUS RAPID TRANSIT (BRT) DESIGN GUIDELINES FOR INDIAN CITIES |
|
| IRC:125-2017 | GUIDELINES ON DOZERS FOR HIGHWAY WORKS |
|
| IRC:126-2017 | GUIDELINES ON WET MIX PLANT |
|
| IRC:127-2018 | GUIDELINES ON SKILL DEVELOPMENT OF WORKMEN IN ROAD SECTOR |
|
| IRC:128-2019 | GUIDELINES ON TRAINING OF HIGHWAY PROFESSIONALS |
|
| IRC:129-2019 | SPECIFICATIONS FOR OPEN-GRADED FRICTION COURSE |
|
| IRC:83 (Part I)-1999 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART I: METALLIC BEARINGS |
|
| IRC:83 (Part I)-2015 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART I: ROLLER & ROCKER BEARINGS |
|
| IRC:83 (Part II)-1987 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART II: ELASTOMERIC BEARINGS |
|
| IRC:83 (Part II)-2018 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART II: ELASTOMERIC BEARINGS |
|
| IRC:83 (Part III)-2002 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART III: POT, POT-CUM-PTFE, PIN AND METALLIC GUIDE BEARINGS |
|
| IRC:83 (Part III)-2018 | STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES SECTION IX BEARINGS PART III: POT, PIN, METALLIC GUIDE AND PLANE SLIDING BEARINGS |
|
| IRC-SOR-014-1995 | SPECIAL REPORT: State of the Art: High Embankments on Soft Ground - Part B - Ground Improvement |
|
| IRC-SOR-017-1996 | SPECIAL REPORT: State of the Art: Non-Destructive Testing Techniques of Concrete Bridge |
|
| IRC-SOR-018-1996 | SPECIAL REPORT: State of the Art: Corrosion and Corrosion Protection of Prestressed Concrete Bridges in Marine Environment |
|
| IRC:SP:4-1966 | BRIDGE LOADINGS ROUND THE WORLD |
|
| IRC:SP:8-1980 | TYPE DESIGNS FOR HIGHWAY KILOMETRE STONES |
|
| IRC:SP:11-1984 | HANDBOOK OF QUALITY CONTROL FOR CONSTRUCTION OF ROADS AND RUNWAYS |
|
| IRC:SP:12-2015 | GUIDELINES FOR PARKING FACILITIES IN URBAN AREAS |
|
| IRC:SP:13-2004 | GUIDELINES FOR THE DESIGN OF SMALL BRIDGES AND CULVERTS |
|
| IRC:SP:14-1980 | A MANUAL FOR THE APPLICATION OF THE CRITICAL PATH METHOD TO HIGHWAY PROJECTS IN INDIA |
|
| IRC:SP:15-1996 | RIBBON DEVELOPMENT ALONG HIGHWAYS AND ITS PREVENTION |
|
| IRC:SP:16-2004 | GUIDELINES FOR SURFACE EVENNESS OF HIGHWAY PAVEMENTS |
|
| IRC:SP:16-2019 | GUIDELINES ON MEASURING ROAD ROUGHNESS AND NORMS |
|
| IRC:SP:17-1977 | RECOMMENDATIONS ABOUT OVERLAYS ON CEMENT CONCRETE PAVEMENTS |
|
| IRC:SP:18-1996 | MANUAL FOR HIGHWAY BRIDGE MAINTENANCE INSPECTION |
|
| IRC:SP:19-2001 | MANUAL FOR SURVEY, INVESTIGATION AND PREPARATION OF ROAD PROJECTS |
|
| IRC:SP:20-2002 | RURAL ROADS MANUAL |
|
| IRC:SP:21-2009 | GUIDELINES ON LANDSCAPING AND TREE PLANTATION |
|
| IRC:SP:22-1980 | RECOMMENDATIONS FOR THE SIZES FOR EACH TYPE OF ROAD MAKING MACHINERY TO CATER TO THE GENERAL DEMAND OF ROAD WORKS |
|
| IRC:SP:23-1993 | VERTICAL CURVES FOR HIGHWAYS |
|
| IRC:SP:24-1984 | GUIDELINES ON THE CHOICE AND PLANNING OF APPROPRIATE TECHNOLOGY IN ROAD CONSTRUCTION |
|
| IRC:SP:25-1984 | GUIDELINES ON MAINTENANCE OF ROAD ROLLERS |
|
| IRC:SP:26-1984 | REPORT CONTAINING RECOMMENDATIONS OF THE IRC REGIONAL WORKSHOPS ON RURAL ROAD DEVELOPMENT |
|
| IRC:SP:27-1984 | REPORT CONTAINING RECOMMENDATIONS OF THE IRC REGIONAL WORKSHOPS ON HIGHWAY SAFETY |
|
| IRC:SP:28-1995 | ROAD TRANSPORT AND ENERGY |
|
| IRC:SP:29-1994 | DIRECTORY OF INDIGENOUS MANUFACTURERS OF ROAD/BRIDGE CONSTRUCTION MACHINERY AND IMPORTANT BRIDGE COMPONENTS |
|
| IRC:SP:30-2009 | MANUAL ON ECONOMIC EVALUATION OF HIGHWAY PROJECTS IN INDIA |
|
| IRC:SP:34-1989 | GENERAL GUIDELINES ABOUT THE EQUIPMENT FOR BITUMINOUS SURFACE DRESSING |
|
| IRC:SP:35-1990 | GUIDELINES FOR INSPECTION AND MAINTENANCE OF BRIDGES |
|
| IRC:SP:36-1991 | GUIDELINES ON FORMAT FOR IRC STANDARDS |
|
| IRC:SP:36-2018 | GUIDELINES FOR IRC STANDARDS |
|
| IRC:SP:37-2010 | GUIDELINES FOR EVALUATION OF LOAD CARRYING CAPACITY OF BRIDGES |
|
| IRC:SP:38-1992 | MANUAL FOR ROAD INVESTMENT DECISION MODEL |
|
| IRC:SP:39-1992 | GUIDELINES ON BULK BITUMEN TRANSPORTATION AND STORAGE EQUIPMENT |
|
| IRC:SP:40-1993 | GUIDELINES FOR TECHNIQUES FOR STRENGTHENING AND REHABILITATION OF BRIDGES |
|
| IRC:SP:40-2019 | GUIDELINES ON REPAIR, STRENGTHENING AND REHABILITATION OF CONCRETE BRIDGES |
|
| IRC:SP:41-1994 | GUIDELINES FOR THE DESIGN OF AT-GRADE INTERSECTIONS IN RURAL AND URBAN AREAS |
|
| IRC:SP:42-2014 | GUIDELINES ON ROAD DRAINAGE |
|
| IRC:SP:43-1994 | GUIDELINES ON LOW-COST TRAFFIC MANAGEMENT TECHNIQUES FOR URBAN AREAS |
|
| IRC:SP:44-1996 | HIGHWAY SAFETY CODE |
|
| IRC:SP:45-1996 | TIME SERIES DATA ON ROAD TRANSPORT PASSENGER AND FREIGHT MOVEMENT (1951-1991) |
|
| IRC:SP:46-2013 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF FIBRE REINFORCED CONCRETE PAVEMENTS |
|
| IRC:SP:47-1998 | GUIDELINES ON QUALITY SYSTEMS FOR ROAD BRIDGES |
|
| IRC:SP:48-1998 | HILL ROAD MANUAL |
|
| IRC:SP:49-2014 | GUIDELINES FOR THE USE OF DRY LEAN CONCRETE AS SUB-BASE FOR RIGID PAVEMENT |
|
| IRC:SP:50-2013 | GUIDELINES ON URBAN DRAINAGE |
|
| IRC:SP:51-2014 | GUIDELINES FOR LOAD TESTING OF BRIDGES |
|
| IRC:SP:52-1999 | BRIDGE INSPECTOR'S REFERENCE MANUAL |
|
| IRC:SP:53-2010 | GUIDELINES ON USE OF MODIFIED BITUMEN IN ROAD CONSTRUCTION |
|
| IRC:SP:54-2000 | PROJECT PREPARATION MANUAL FOR BRIDGES |
|
| IRC:SP:54-2018 | PROJECT PREPARATION MANUAL FOR BRIDGES |
|
| IRC:SP:55-2014 | GUIDELINES ON TRAFFIC MANAGEMENT IN WORK ZONES |
|
| IRC:SP:56-2011 | GUIDELINES FOR STEEL PEDESTRIAN BRIDGES |
|
| IRC:SP:57-2000 | GUIDELINES ON QUALITY SYSTEMS FOR ROADS |
|
| IRC:SP:58-1999 | GUIDELINES FOR USE OF FLY ASH IN ROAD EMBANKMENTS |
|
| IRC:SP:59-2019 | GUIDELINES FOR USE OF GEOSYNTHETICS IN ROAD PAVEMENTS AND ASSOCIATED WORKS |
|
| IRC:SP:60-2002 | AN APPROACH DOCUMENT FOR ASSESSMENT OF REMAINING LIFE OF CONCRETE BRIDGES |
|
| IRC:SP:61-2004 | AN APPROACH DOCUMENT ON WHOLE LIFE COSTING FOR BRIDGES IN INDIA |
|
| IRC:SP:62-2014 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF CEMENT CONCRETE PAVEMENTS FOR LOW VOLUME ROADS |
|
| IRC:SP:63-2004 | GUIDELINES FOR THE USE OF INTERLOCKING CONCRETE BLOCK PAVEMENT |
|
| IRC:SP:63-2018 | GUIDELINES FOR THE USE OF INTERLOCKING CONCRETE BLOCK PAVEMENT |
|
| IRC:SP:64-2005 | GUIDELINES FOR THE ANALYSIS AND DESIGN OF CAST-IN-PLACE VOIDED SLAB SUPERSTRUCTURE |
|
| IRC:SP:64-2016 | GUIDELINES FOR THE ANALYSIS AND DESIGN OF CAST-IN-PLACE VOIDED SLAB SUPERSTRUCTURE |
|
| IRC:SP:65-2005 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF SEGMENTAL BRIDGES |
|
| IRC:SP:65-2018 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF SEGMENTAL BRIDGES |
|
| IRC:SP:66-2005 | GUIDELINES FOR DESIGN OF CONTINUOUS BRIDGES |
|
| IRC:SP:66-2016 | GUIDELINES FOR DESIGN OF CONTINUOUS BRIDGES |
|
| IRC:SP:67-2005 | GUIDELINES FOR USE OF EXTERNAL AND UNBONDED PRESTRESSING TENDONS IN BRIDGE STRUCTURES |
|
| IRC:SP:68-2005 | GUIDELINES FOR CONSTRUCTION OF ROLLER COMPACTED CONCRETE PAVEMENTS |
|
| IRC:SP:69-2011 | GUIDELINES AND SPECIFICATIONS FOR EXPANSION JOINTS |
|
| IRC:SP:70-2005 | GUIDELINES FOR THE USE OF HIGH PERFORMANCE CONCRETE IN BRIDGES |
|
| IRC:SP:71-2006 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF PRECAST PRE-TENSIONED GIRDERS FOR BRIDGES |
|
| IRC:SP:71-2018 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF PRECAST PRE-TENSIONED GIRDERS FOR BRIDGES |
|
| IRC:SP:72-2015 | GUIDELINES FOR THE DESIGN OF FLEXIBLE PAVEMENTS FOR LOW VOLUME RURAL ROADS |
|
| IRC:SP:73-2007 | MANUAL OF STANDARDS AND SPECIFICATIONS FOR TWO LANING OF STATE HIGHWAYS ON B.O.T. BASIS |
|
| IRC:SP:73-2018 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR TWO LANING OF HIGHWAYS WITH PAVED SHOULDER |
|
| IRC:SP:74-2007 | GUIDELINES FOR REPAIR AND REHABILITATION OF STEEL BRIDGES |
|
| IRC:SP:75-2008 | GUIDELINES FOR RETROFITTING OF STEEL BRIDGES BY PRESTRESSING |
|
| IRC:SP:76-2015 | GUIDELINES FOR CONVENTIONAL AND THIN WHITETOPPING |
|
| IRC:SP:77-2008 | MANUAL FOR DESIGN, CONSTRUCTION AND MAINTENANCE OF GRAVEL ROADS |
|
| IRC:SP:78-2008 | SPECIFICATIONS FOR MIX SEAL SURFACING (MSS) CLOSE-GRADED PREMIX SURFACING (CGPS) |
|
| IRC:SP:79-2008 | TENTATIVE SPECIFICATIONS FOR STONE MATRIX ASPHALT |
|
| IRC:SP:80-2008 | GUIDELINES FOR CORROSION PREVENTION, MONITORING AND REMEDIAL MEASURES FOR CONCRETE BRIDGE STRUCTURES |
|
| IRC:SP:81-2008 | TENTATIVE SPECIFICATIONS FOR SLURRY SEAL AND MICROSURFACING |
|
| IRC:SP:82-2008 | GUIDELINES FOR DESIGN OF CAUSEWAYS AND SUBMERSIBLE BRIDGES |
|
| IRC:SP:83-2008 | GUIDELINES FOR MAINTENANCE, REPAIR AND REHABILITATION OF CEMENT CONCRETE PAVEMENTS |
|
| IRC:SP:83-2018 | GUIDELINES FOR MAINTENANCE, REPAIR AND REHABILITATION OF CEMENT CONCRETE PAVEMENTS |
|
| IRC:SP:84-2014 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR FOUR LANING OF HIGHWAYS THROUGH PUBLIC PRIVATE PARTNERSHIP |
|
| IRC:SP:84-2019 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR FOUR LANING OF HIGHWAYS |
|
| IRC:SP:85-2010 | GUIDELINES FOR VARIABLE MESSAGE SIGNS |
|
| IRC:SP:86-2010 | GUIDELINES FOR SELECTION, OPERATION AND MAINTENANCE OF PAVER FINISHERS |
|
| IRC:SP:87-2013 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR SIX LANING OF HIGHWAYS THROUGH PUBLIC PRIVATE PARTNERSHIP |
|
| IRC:SP:87-2019 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR SIX LANING OF HIGHWAYS |
|
| IRC:SP:88-2010 | MANUAL ON ROAD SAFETY AUDIT |
|
| IRC:SP:88-2019 | MANUAL ON ROAD SAFETY AUDIT |
|
| IRC:SP:89-1-2010 | GUIDELINES FOR SOIL AND GRANULAR MATERIAL STABILIZATION USING CEMENT, LIME AND FLY ASH |
|
| IRC:SP:89-2-2018 | GUIDELINES FOR THE DESIGN OF STABILIZED PAVEMENTS (Part II) |
|
| IRC:SP:90-2010 | MANUAL FOR GRADE SEPARATORS AND ELEVATED STRUCTURES |
|
| IRC:SP:91-2010 | GUIDELINES FOR ROAD TUNNELS |
|
| IRC:SP:92-2010 | ROAD MAP FOR HUMAN RESOURCE DEVELOPMENT IN HIGHWAY SECTOR |
|
| IRC:SP:93-2011 | GUIDELINES ON REQUIREMENTS FOR ENVIRONMENTAL CLEARANCE FOR ROAD PROJECTS |
|
| IRC:SP:93-2017 | GUIDELINES ON REQUIREMENTS FOR ENVIRONMENTAL CLEARANCES FOR ROAD PROJECTS |
|
| IRC:SP:94-2011 | MATERIAL TESTING FACILITIES FOR HIGHWAY SECTOR IN NATIONAL CAPITAL REGION |
|
| IRC:SP:95-2011 | MODEL CONTRACT DOCUMENT FOR MAINTENANCE OF HIGHWAYS |
|
| IRC:SP:96-2012 | GUIDELINES FOR SELECTION, OPERATION AND MAINTENANCE OF CONCRETE BATCHING AND MIXING PLANTS |
|
| IRC:SP:97-2013 | GUIDELINES ON COMPACTION EQUIPMENT FOR ROAD WORKS |
|
| IRC:SP:98-2013 | GUIDELINES FOR THE USE OF WASTE PLASTIC IN HOT BITUMINOUS MIXES (DRY PROCESS) IN WEARING COURSES |
|
| IRC:SP:99-2013 | MANUAL OF SPECIFICATIONS AND STANDARDS FOR EXPRESSWAYS |
|
| IRC:SP:100-2014 | USE OF COLD MIX TECHNOLOGY IN CONSTRUCTION AND MAINTENANCE OF ROADS USING BITUMEN EMULSION |
|
| IRC:SP:101-2014 | INTERIM GUIDELINES FOR WARM MIX ASPHALT |
|
| IRC:SP:101-2019 | GUIDELINES FOR WARM MIX ASPHALT |
|
| IRC:SP:102-2014 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF REINFORCED SOIL WALLS |
|
| IRC:SP:103-2014 | GUIDELINES ON TREE PLANTATION ALONG RURAL ROADS |
|
| IRC:SP:104-2015 | GUIDELINES FOR FABRICATION AND ERECTION OF STEEL BRIDGES |
|
| IRC:SP:105-2015 | EXPLANATORY HANDBOOK TO IRC:112-2011 CODE OF PRACTICE FOR CONCRETE ROAD BRIDGE |
|
| IRC:SP:106-2015 | ENGINEERING GUIDELINES ON LANDSLIDE MITIGATION MEASURES FOR INDIAN ROADS |
|
| IRC:SP:107-2015 | GUIDELINES FOR GAP GRADED WEARING COURSE WITH RUBBERISED BITUMEN (BITUMEN-RUBBER) |
|
| IRC:SP:108-2015 | GUIDELINES ON PREPARATION AND IMPLEMENTATION OF ENVIRONMENT MANAGEMENT PLAN |
|
| IRC:SP:109-2015 | GUIDELINES FOR DESIGN AND CONSTRUCTION OF SMALL DIAMETER PILES FOR ROAD BRIDGES |
|
| IRC:SP:110-2017 | APPLICATION OF INTELLIGENT TRANSPORT SYSTEM FOR URBAN ROADS |
|
| IRC:SP:111-2017 | CAPACITY BUILDING OF ROAD AGENCIES IN CHARGE OF IMPLEMENTATION OF ROAD PROJECTS IN URBAN AREAS |
|
| IRC:SP:112-2017 | MANUAL FOR QUALITY CONTROL IN ROAD AND BRIDGE WORKS |
|
| IRC:SP:113-2018 | GUIDELINES ON FLOOD DISASTER MITIGATION FOR HIGHWAY ENGINEERS |
|
| IRC:SP:114-2018 | GUIDELINES FOR SEISMIC DESIGN OF ROAD BRIDGES |
|
| IRC:SP:115-2018 | GUIDELINES FOR DESIGN OF INTEGRAL BRIDGES |
|
| IRC:SP:116-2018 | GUIDELINES FOR DESIGN AND INSTALLATION OF GABION STRUCTURES |
|
| IRC:SP:117-2018 | MANUAL ON UNIVERSAL ACCESSIBILITY FOR URBAN ROADS AND STREETS |
|
| IRC:SP:118-2018 | MANUAL FOR PLANNING AND DEVELOPMENT OF URBAN ROADS AND STREETS |
|
| IRC:SP:119-2018 | MANUAL OF PLANTING AND LANDSCAPING OF URBAN ROADS |
|
| IRC:SP:120-2018 | EXPLANATORY HANDBOOK TO IRC:22-2015 STANDARD SPECIFICATIONS AND CODE OF PRACTICE FOR ROAD BRIDGES, SECTION VI-COMPOSITE CONSTRUCTION |
|
| IRC:SP:121-2018 | GUIDELINES FOR USE OF IRON, STEEL AND COPPER SLAG IN CONSTRUCTION OF RURAL ROADS |
|
| IRC:SP:124-2019 | MODEL CONTRACT FOR MAINTENANCE OF ROADS (Based on Single Percentage Rate) |
|
| IRC:SP:125-2019 | GUIDELINES FOR CEMENT GROUTED BITUMINOUS MIX SURFACING FOR URBAN ROADS |
|
| IRC:SP:126-2019 | GUIDELINES FOR THE DESIGN AND CONSTRUCTION OF LOW VOLUME RURAL ROADS USING JUTE GEOTEXTILES |
Ministry of Rural Development standards for rural roads. 10 documents.
| Code No. | Title & Scope | Download |
|---|---|---|
| MoRD-STD-018-2016 | Rural Road Safety Manual - Promoting Safer Connectivity in Rural India |
|
| MoRD-STD-019-2016 | Manual on Construction Equipment for Rural Roads |
|
| MoRD-STD-020-2016 | Quality Assurance Handbook for Rural Roads Volume-I: Quality Management System and Quality Control Requirements |
|
| MoRD-STD-021-2016 | Quality Assurance Handbook for Rural Roads Volume-II: Equipment and Test Procedures |
|
| MoRD-STD-022-2015 | Measures Proposed to Achieve Economy in Construction of Rural Roads under the PMGSY |
|
| MoRD-STD-023-2015 | Standard Bidding Document For Pradhan Mantri Gram Sadak Yojana (PMGSY) For Construction and Maintenance |
|
| MoRD-STD-024-2015 | DO IT YOURSELF: Construction of Cement Stabilized Sub-Base/Base |
|
| MoRD-STD-025-2015 | DO IT YOURSELF: Rural Roads Construction Using Fly Ash |
|
| MoRD-STD-026-2015 | DO IT YOURSELF: Cell Filled Concrete Pavement |
|
| MoRD-STD-030-2015 | Guidelines For Road Signages under Pradhan Mantri Gram Sadak Yojana |
Ministry of Road Transport and Highways specifications and guidelines. 10 documents.
| Code No. | Title & Scope | Download |
|---|---|---|
| MoRTH-245-2018 | POCKET BOOK FOR ROAD CONSTRUCTION EQUIPMENT |
|
| MoRTH-246-1983 | MANUAL FOR MAINTENANCE OF ROADS |
|
| MoRTH-248-2002 | POCKET BOOK FOR HIGHWAY ENGINEERS |
|
| MoRTH-248-2019 | POCKET BOOK FOR HIGHWAY ENGINEERS |
|
| MoRTH-250-2013 | Specifications for Road and Bridge Works |
|
| MoRTH-256-2-1997 | STANDARD PLANS FOR HIGHWAY BRIDGES: PRESTRESSED CONCRETE BEAMS AND R.C.C. SLAB TYPE SUPERSTRUCTURE |
|
| MoRTH-278-1-2010 | Guidelines for Expressways PART I: Volume-I Planning, Volume-II Design |
|
| MoRTH-278-2-2010 | Guidelines for Expressways PART II: Volume-III Operations and Management, Volume-IV Maintenance |
|
| MoRTH-SDB-01-2019 | STANDARD DATA BOOK FOR ANALYSIS OF RATES Volume-I: For Plain/Rolling Terrain |
|
| MoRTH-SDB-02-2019 | STANDARD DATA BOOK FOR ANALYSIS OF RATES Volume-II: For Hilly Terrain |
| Category | Title & Description | Download |
|---|---|---|
| METHODOLOGY | Hydraulic Models & Dimensional Analysis Foundational reference on physical hydraulic model design and Froude similitude — Innovante Technical Note | |
| GUIDE | HEC-RAS Modelling for Bridge Waterway Design — A Practitioner's Checklist Step-by-step guidance on setting up, running and interpreting HEC-RAS steady-flow models for bridge and barrage design | |
| REFERENCE | Floating Solar on Reservoirs — Capacity Assessment Methodology GIS-based screening framework for estimating viable FPV capacity using bathymetry, ecological constraints and shading analysis | |
| GUIDE | Piano Key Weir Design — Physical Modelling Approach Overview of scale model setup, similarity criteria and performance validation for PKW installations on existing dams | |
| REFERENCE | CWPRS Technical Reports Index — Hydraulic Structures Curated index of Central Water and Power Research Station technical reports on weir, spillway and stilling basin design |
Quarterly digest
Technical notes, case studies and industry developments — written by our engineers, no marketing. Unsubscribe in one click.
